%%
%% This is file `eurofont.sty',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% eurofont.dtx  (with options: `package')
%% 
%% IMPORTANT NOTICE:
%% 
%% For the copyright see the source file.
%% 
%% Any modified versions of this file must be renamed
%% with new filenames distinct from eurofont.sty.
%% 
%% For distribution of the original source see the terms
%% for copying and modification in the file eurofont.dtx.
%% 
%% This generated file may be distributed as long as the
%% original source files, as listed above, are part of the
%% same distribution. (The sources need not necessarily be
%% in the same archive or directory.)
%%\iffalse
%% File eurofont.sty
%% copyright Rowland McDonnell 1998
%% email rebecca@astrid.u-net.com
%%\This file is part of the eurofont distribution.  You can distribute it
%% freely provided that you include the rest of the eurofont distribution
%% with this file and make no more than a nominal charge to cover the
%% costs of distributing it.
%%
%% If you would like to change the contents of this file, please make a
%% copy of it under a different name and change that instead. Keep my
%% copyright notice attached, but make it clear that the new file is your
%% responsibility so you get the credit for the improvements and I don't
%% get blamed for the bugs.
%% \CheckSum{1267}
%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \<
%%   Equals        \=     Greater than  \>     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~}
%%
%%    List contents                                Corresponding command
%%
%%
%%    List contents                                Corresponding command
%%
%% Put all the standard LaTeX weights (and likely extras)
%% into one of the following lists:
\NeedsTeXFormat{LaTeX2e}[1998/06/01]
\ProvidesPackage{eurofont}[1999/01/30 v1.1.3 A package for using euro
symbols]
\def\userlist{}
\def\texteurolist{}
\def\chinaelist{}
\def\cmlist{}
\def\seriflist{}
\def\sanslist{}
\def\monolist{}
\def\fakemediumlist{}
\def\fakelightlist{}
\def\fakeheavylist{}
\def\faketexteurolist{}
\def\EFlightserieslist{}
\def\EFmediumserieslist{}
\def\EFboldserieslist{}
\def\EFultraboldserieslist{}
\newif\ifEF@debugreport
\EF@debugreportfalse% Debugging reports off by default
\def\EF@debugrep#1{\ifEF@debugreport\typeout{eurofont: #1}\fi}
\newif\ifEF@listed
\def\EF@checkiflisted#1#2{% check if element #1 is in list #2
\EF@listedfalse%
\edef\thiselem{#1}% changed to edef from def RJMM 1/9/98
\let\@@elt\@elt% Save \@elt (in case this command is executed
\def\@elt##1{\def\testelem{##1}%
\ifx\thiselem\testelem\EF@listedtrue\fi}%
#2\let\@elt\@@elt}% execute list and restore \@elt
\newcommand{\EFaddtolist}[2]{% #1 = list name;
\EF@addtolist#2,:#1\end}
\def\EF@addtolist#1,#2:#3\end{% #3 is the list now
\def\@tempcmda{#2}%
\ifx\@tempcmda\@empty%
   \EF@debugrep{Last elem: #1}\relax% if #2 is empty, do this.
    \EF@addMember{#1}{#3}%            if #2 is empty, do this
    \else
     \EF@debugrep{elem: #1}\relax% if #2 is not empty, do this
      \EF@addMember{#1}{#3}%       if #2 is not empty, do this
      \EF@addtolist#2:#3\end\fi}%  if #2 is not empty, do this
\newcommand{\EF@addMember}[2]{%
    %%% add #1 only if it isn't yet in the list
    %%% it surely would be more efficient without the check...
    {\EF@checkiflisted{#1}{#2}\relax% to suppress space
    \ifEF@listed
    \EF@debugrep{#1 already in the list}\relax%
    \else
    \EF@debugrep{adding #1 to \string #2}\relax%
    \EF@rightappenditem{#1}{#2}\fi}}
\newtoks\EF@tokb% token list register for temp use
\newcommand{\EF@rightappenditem}[2]%
{\@temptokena={\@elt{#1}}\EF@tokb=\expandafter{#2}%
\xdef#2{\the\EF@tokb\the\@temptokena}}% change the list globally
\newif\ifEF@marvosym\EF@marvosymfalse% Adobe Eurofonts by default
\newif\ifEF@eurosym\EF@eurosymfalse%   Don't use eurosym by default
\newif\ifEF@textcomp\EF@textcomptrue% Load the textcomp package if
\newif\ifEF@fixtieaccent\EF@fixtieaccentfalse% Don't re-define tie
\DeclareOption{marvosym}      {\EF@marvosymtrue}
\DeclareOption{adobeeurofonts}{\EF@marvosymfalse}
\DeclareOption{eurosym}  {\EF@eurosymtrue}
\DeclareOption{noeurosym}{\EF@eurosymfalse}
\DeclareOption{debugreport}{\EF@debugreporttrue}
\DeclareOption{nodebugreport}{\EF@debugreportfalse}
\DeclareOption{notextcomp}{\EF@textcompfalse}
\DeclareOption{textcomp}{\EF@textcomptrue}
\DeclareOption{fixtieaccent}{\EF@fixtieaccenttrue}
\DeclareOption{nofixtieaccent}{\EF@fixtieaccentfalse}
\newcommand*{\fakelighteuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakelighteuro}
\newcommand*{\fakemediumeuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakemediumeuro}
\newcommand*{\fakeheavyeuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakeheavyeuro}
\DeclareOption{noslantfakeeuro} {%
    \def\EF@fakeslant{0}% in case anyone's interested
    \newcommand*{\@fakemediumeuro}[1][100]
                {\mediumruleeuronoslant{\EF@tmprlift}{#1}}
    \newcommand*{\@fakelighteuro}[1][100]
                {\lightruleeuronoslant{\EF@tmprlift}{#1}}
    \newcommand*{\@fakeheavyeuro}[1][100]
                {\heavyruleeuronoslant{\EF@tmprlift}{#1}}}
\DeclareOption{normalslantfakeeuro} {%
    \def\EF@fakeslant{1}% in case anyone's interested
    \newcommand*{\@fakemediumeuro}[1][100]
                {\mediumruleeuronorm{\EF@tmprlift}{#1}}
    \newcommand*{\@fakelighteuro}[1][100]
                {\lightruleeuronorm{\EF@tmprlift}{#1}}
    \newcommand*{\@fakeheavyeuro}[1][100]
                {\heavyruleeuronorm{\EF@tmprlift}{#1}}}
\DeclareOption{bigslantfakeeuro} {%
    \def\EF@fakeslant{2}% in case anyone's interested
    \newcommand*{\@fakemediumeuro}[1][100]
                {\mediumruleeurobigslant{\EF@tmprlift}{#1}}
    \newcommand*{\@fakelighteuro}[1][100]
                {\lightruleeurobigslant{\EF@tmprlift}{#1}}
    \newcommand*{\@fakeheavyeuro}[1][100]
                {\heavyruleeurobigslant{\EF@tmprlift}{#1}}}
\DeclareOption{left}{\PassOptionsToPackage{left}{eurosym}%
\DeclareRobustCommand{\euros}[1]{\euro\nobreak\,#1}}
\DeclareOption{right}{\PassOptionsToPackage{right}{eurosym}%
\DeclareRobustCommand{\euros}[1]{#1\nobreak\,\euro}}
\DeclareOption{official}{\PassOptionsToPackage{official}{eurosym}}
\DeclareOption{gen}{\PassOptionsToPackage{gen}{eurosym}}
\DeclareOption{gennarrow}{\PassOptionsToPackage{gennarrow}{eurosym}}
\DeclareOption{genwide}{\PassOptionsToPackage{genwide}{eurosym}}
\ExecuteOptions{adobeeurofonts}% Use Adobe's Eurofonts by default
\ExecuteOptions{noeurosym}%      Don't use eurosym by default
\ExecuteOptions{left}%           Euro symbol on left by default
\ExecuteOptions{normalslantfakeeuro}% Fake euros with slight slant by default
\ExecuteOptions{nodebugreport}%  No debugging reports by default
\ExecuteOptions{textcomp}%  Load the textcomp package by default
\ExecuteOptions{nofixtieaccent}%  Don't re-define the tie accent by
\InputIfFileExists{eurofont.cfg}{}%
{\PackageWarningNoLine{eurofont}%
{I can't find the eurofont.cfg configuration file.\MessageBreak
Perhaps something is wrong with this installation?\MessageBreak
The \protect\euro\space command will work with default settings}%
\EFaddtolist{\userlist}{}
\EFaddtolist{\texteurolist}{}
\EFaddtolist{\chinaelist}{}
\EFaddtolist{\cmlist}{cmr,cmss,cmtt}
\EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put}
\EFaddtolist{\sanslist}{pag,phv,psy,pzd}
\EFaddtolist{\monolist}{pcr}
\EFaddtolist{\fakemediumlist}{pzc}
\EFaddtolist{\fakelightlist}{}
\EFaddtolist{\fakeheavylist}{}
\EFaddtolist{\faketexteurolist}{}
\EFaddtolist{\EFlightserieslist}{ul,el,l,ulc,elc,lc,ulx,elx,lx}
\EFaddtolist{\EFmediumserieslist}{m,mb,db,sb,mc,mbc,dbc,sbc,mx,mbx,dbx,sbx}
\EFaddtolist{\EFboldserieslist}{b,bx,bc}
\EFaddtolist{\EFultraboldserieslist}{eb,ub,ebc,ubc,ebx,ubx}%
\EFaddtolist{\EFultraboldserieslist}{xb,ebd}
}
\ProcessOptions
\ifEF@textcomp\IfFileExists{textcomp.sty}{\RequirePackage{textcomp}}{}\fi
\ifEF@fixtieaccent \DeclareTextAccentDefault{\t}{OML}\fi
\ifEF@eurosym%
\def\euro{\makefakeeuro}
\IfFileExists{eurosym.sty}{\RequirePackage{eurosym}}{%
\PackageError{eurofont}{I can't find the eurosym package}%
{You've used the eurosym option; this requires the eurosym package
which doesn't appear to be installed}}%
\let\ESeuro\euro
\fi
\newcommand{\showfontfamily}{
\typeout{**********************************}
\typeout{* \protect\showfontfamily:
      \space\space\space\space\space\space
      \space\space\space\space\space\space
      \space\space\space*}
\typeout{*\space\space\space\space\space\space
          \space\space\space\space\space\space
      \space\space\space\space\space\space
      \space\space\space\space\space\space
      \space\space\space\space\space\space
      \space\space\space*}
\typeout{* The current font family is: \f@family\space *}
\typeout{*\space\space\space\space\space\space
          \space\space\space\space\space\space
      \space\space\space\space\space\space
      \space\space\space\space\space\space
      \space\space\space\space\space\space
      \space\space\space*}
\typeout{***********************************}
}
\def\EF@crossstrokes#1#2#3#4#5#6#7#8#9{%
\@ifundefined{EF@slantcorr}{\def\EF@slantcorr{100}}{}%
\@tempdima=#8%
\@tempdima=\fontdimen1\font%
\@tempdima=0.1\@tempdima%
\@tempdima=\EF@slantcorr\@tempdima%
\@tempdima=0.1\@tempdima%
\edef\@tempcmda{\strip@pt\@tempdima}%
\@tempdima=#2% Changed from width #1 to height #2
\@tempdima=\@tempcmda\@tempdima%
\@tempdima=0.5\@tempdima%
\edef\EF@slantC{\the\@tempdima}%
\@tempdimb=#8% centre line spacing of rules
\@tempdimb=\@tempcmda\@tempdimb%
\@tempdimb=0.5\@tempdimb%
\edef\EF@rulehoffset{\the\@tempdimb}%
\@tempdima=#1%             \
\@tempdima=0.01\@tempdima%  \
\@tempdima=#4\@tempdima%     } move back to add cross-strokes
\kern-\@tempdima%           /
\kern\EF@slantC%           /  Slant correction forward for italic
\@tempdima=#2%                      \
\advance\@tempdima by-#3%            \
\advance\@tempdima by-#8%             \ calc lift of cross-strokes
\advance\@tempdima by-#7%             /
\@tempdima=0.5\@tempdima%            /
\advance\@tempdima by#9%            /
\@tempdimc=#8%             \ calc cross-stroke spacing
\advance\@tempdimc by-#7%  /
\raisebox{\@tempdima}{%
\vbox{%                             \
\@tempdimb=#1%                \      \
\@tempdimb=0.01\@tempdimb%     } calc width of cross-stroke
\@tempdimb=#5\@tempdimb%      /        \
\hbox{\kern\EF@rulehoffset%             \ top rule
\vbox{\hrule width\@tempdimb height#7}}% \
\nointerlineskip%                         } draw cross-strokes
\vskip\@tempdimc%                        / (using \@tempdima/b/c from above)
\@tempdimb=#1%                \         /
\@tempdimb=0.01\@tempdimb%     } calc width of cross-stroke
\@tempdimb=#6\@tempdimb%      /       /
\hbox{\kern-\EF@rulehoffset%         /
\vbox{\hrule width\@tempdimb height#7}}}}%  bottom rule
\@tempcnta=#4%                   \
\advance\@tempcnta by-#5%  (aha!) \
\@tempdima=#1%                     \
\@tempdima=0.01\@tempdima%          \ move forward to end of C
\@tempdima=\@tempcnta\@tempdima%    /
\kern\@tempdima%                   /
\kern-\EF@slantC%                /   slant correction
}
\providecommand\EF@fakeeurobase{C}
\def\EFruleeuro#1#2#3#4#5#6#7{{% Confine defs to \EFruleeuro
\settowidth{\@tempdima}{\EF@fakeeurobase}%
\settoheight{\@tempdimb}{\EF@fakeeurobase}%
\settodepth{\@tempdimc}{\EF@fakeeurobase}%
\edef\EF@Cwidth{\the\@tempdima}%
\edef\EF@Cheight{\the\@tempdimb}%
\edef\EF@Cdepth{\the\@tempdimc}%
\advance\@tempdimb by\@tempdimc%
\def\EF@slantcorr{#7}%
\ifx\EF@slantcorr\@empty\def\EF@slantcorr{100}\fi%
\def\EF@backshift{#1}% percentage of \EF@Cwidth that back shift is
\@tempdimb=0.01\@tempdima%          swapped these two lines;
\@tempdimb=\EF@backshift\@tempdimb% dimen can get too big otherwise
\ifdim\@tempdimb>\@tempdima\@tempdima=\@tempdimb\fi%
\makebox[\@tempdima][r]%
{\EF@fakeeurobase\EF@crossstrokes{\EF@Cwidth}{\EF@Cheight}{\EF@Cdepth}%
                                 {\EF@backshift}{#2}{#3}{#4}{#5}{#6}}%
}}
\def\SelectOnWeight#1#2#3#4{%
\EF@checkiflisted{\f@series}{\EFlightserieslist}%
\ifEF@listed\EF@debugrep{SelectOnWeight light}#1%
\else
\EF@checkiflisted{\f@series}{\EFmediumserieslist}%
\ifEF@listed\EF@debugrep{SelectOnWeight medium}#2%
\else
\EF@checkiflisted{\f@series}{\EFboldserieslist}%
\ifEF@listed\EF@debugrep{SelectOnWeight bold}#3%
\else
\EF@checkiflisted{\f@series}{\EFultraboldserieslist}%
\ifEF@listed\EF@debugrep{SelectOnWeight ultrabold}#4%
\else\EF@debugrep{SelectOnWeight default to medium}%
#2%
\fi\fi\fi\fi}
\providecommand*{\mediumruleeuronorm}[2]{\EF@debugrep{medium rule euro norm}%
\SelectOnWeight%
{\EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{#1}{#2}}% light
{\EFruleeuro{110}{80}{72}{0.07ex}{0.27ex}{#1}{#2}}% medium
{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% bold
{\EFruleeuro{110}{80}{72}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold - new numbers
}
\providecommand*{\mediumruleeuronoslant}[2]{\EF@debugrep{medium rule euro noslant}%
\SelectOnWeight%
{\EFruleeuro{110}{80}{80}{0.04ex}{0.27ex}{#1}{#2}}% light
{\EFruleeuro{110}{80}{80}{0.07ex}{0.27ex}{#1}{#2}}% medium
{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% bold
{\EFruleeuro{110}{80}{80}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold
}
\providecommand*{\mediumruleeurobigslant}[2]{\EF@debugrep{medium rule euro bigslant}%
\SelectOnWeight%
{\EFruleeuro{110}{80}{60}{0.04ex}{0.27ex}{#1}{#2}}% light
{\EFruleeuro{110}{80}{60}{0.07ex}{0.27ex}{#1}{#2}}% medium
{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% bold
{\EFruleeuro{110}{80}{60}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold
}
\providecommand*{\lightruleeuronorm}[2]{\EF@debugrep{light rule euro norm}%
\SelectOnWeight%
{\EFruleeuro{110}{80}{72}{0.02ex}{0.27ex}{#1}{#2}}% light
{\EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{#1}{#2}}% medium
{\EFruleeuro{110}{80}{72}{0.07ex}{0.27ex}{#1}{#2}}% bold
{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold
}
\providecommand*{\lightruleeuronoslant}[2]{\EF@debugrep{light rule euro noslant}%
\SelectOnWeight%
{\EFruleeuro{110}{80}{80}{0.02ex}{0.27ex}{#1}{#2}}% light
{\EFruleeuro{110}{80}{80}{0.04ex}{0.27ex}{#1}{#2}}% medium
{\EFruleeuro{110}{80}{80}{0.07ex}{0.27ex}{#1}{#2}}% bold
{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold
}
\providecommand*{\lightruleeurobigslant}[2]{\EF@debugrep{light rule euro bigslant}%
\SelectOnWeight%
{\EFruleeuro{110}{80}{60}{0.02ex}{0.27ex}{#1}{#2}}% light
{\EFruleeuro{110}{80}{60}{0.04ex}{0.27ex}{#1}{#2}}% medium
{\EFruleeuro{110}{80}{60}{0.07ex}{0.27ex}{#1}{#2}}% bold
{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold
}
\providecommand*{\heavyruleeuronorm}[2]{\EF@debugrep{heavy rule euro norm}%
\SelectOnWeight%
{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% light
{\EFruleeuro{110}{80}{72}{0.18ex}{0.27ex}{#1}{#2}}% medium
{\EFruleeuro{110}{80}{72}{0.22ex}{0.30ex}{#1}{#2}}% bold
{\EFruleeuro{110}{80}{72}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold
}
\providecommand*{\heavyruleeuronoslant}[2]{\EF@debugrep{heavy rule euro noslant}%
\SelectOnWeight%
{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% light
{\EFruleeuro{110}{80}{80}{0.18ex}{0.27ex}{#1}{#2}}% medium
{\EFruleeuro{110}{80}{80}{0.22ex}{0.30ex}{#1}{#2}}% bold
{\EFruleeuro{110}{80}{80}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold
}
\providecommand*{\heavyruleeurobigslant}[2]{\EF@debugrep{heavy rule euro bigslant}%
\SelectOnWeight%
{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% light
{\EFruleeuro{110}{80}{60}{0.18ex}{0.27ex}{#1}{#2}}% medium
{\EFruleeuro{110}{80}{60}{0.22ex}{0.30ex}{#1}{#2}}% bold
{\EFruleeuro{110}{80}{60}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold
}
\def\EF@mvs{\fontencoding{U}\fontfamily{zmvs}\fontseries{m}\selectfont}
\providecommand{\marvosymeuro}[1]{%
\EF@debugrep{marvosymeuro}%
\SelectOnWeight%
{\EF@mvs\char#1}% light
{\EF@mvs\char#1}% medium
{\mbox{\EF@pmsb{\EF@mvs\char#1}}}% bold
{\mbox{\EF@pmsb{\EF@mvs\char#1}}}% ultra bold
}
\providecommand
 {\marvosymserifeuro}{\EF@debugrep{marvosymserifeuro}\marvosymeuro{101}}
\providecommand
 {\marvosymsanseuro}{\EF@debugrep{marvosymsanseuro}\marvosymeuro{99}}
\providecommand
 {\marvosymmonoeuro}{\EF@debugrep{marvosymmonoeuro}\marvosymeuro{100}}
\newlength{\EF@pmbshift}
\newcommand{\EF@pmsb}[1]{%
\EF@debugrep{EF@pmsb}%
\EF@pmbshift=0.020em% as was
\hbox{%
\rlap{#1}%
\kern0.5\EF@pmbshift%
\raisebox{0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
\raisebox{-0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
\kern1\EF@pmbshift%
\raisebox{0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
\raisebox{-0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
\kern0.5\EF@pmbshift%
#1}}
\newcommand{\EF@pmb}[1]{%
\EF@debugrep{EF@pmb}%
\EF@pmbshift=0.020em% as was
\hbox{%
\rlap{#1}%
\kern0.5\EF@pmbshift%
\raisebox{0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
\raisebox{-0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
\kern1\EF@pmbshift%
\raisebox{0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
\raisebox{-0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
\kern0.5\EF@pmbshift%
#1}}
\def\EFiftexteuroexists#1#2{%
\EF@checkiflisted{\f@family}{\faketexteurolist}%
\ifEF@listed#2%
\else
\ifx\texteuro\@undefined#2% if \texteuro doesn't exist, #2 and finish
\else%
\IfFileExists{ts1\f@family.fd}%
{#1}% if ts1<fam>.fd exists, #1.  Can't usefully test for glyph existing
{#2}% if ts1<fam>.fd doesn't exist, #2 and finish
\fi\fi}
\providecommand{\zpeutteuro}{\EF@debugrep{zpeutteuro}%
{\fontencoding{U}\fontfamily{zpeutt}\selectfont e}}
\providecommand{\zpeureuro}{\EF@debugrep{zpeureuro}%
{\fontencoding{U}\fontfamily{zpeur}\selectfont e}}
\providecommand{\zpeusseuro}{\EF@debugrep{zpeusseuro}%
{\fontencoding{U}\fontfamily{zpeuss}\selectfont e}}
\ifEF@marvosym
\providecommand{\monoeuro}{\EF@debugrep{monoeuro}{\marvosymmonoeuro}}
\providecommand{\serifeuro}{\EF@debugrep{serifeuro}{\marvosymserifeuro}}
\providecommand{\sanseuro}{\EF@debugrep{sanseuro}{\marvosymsanseuro}}
\else
\providecommand{\monoeuro}{\EF@debugrep{monoeuro}\zpeutteuro}
\providecommand{\serifeuro}{\EF@debugrep{serifeuro}\zpeureuro}
\providecommand{\sanseuro}{\EF@debugrep{sanseuro}\zpeusseuro}
\fi
\providecommand{\makeusereuro}
               {\EF@debugrep{makeusereuro}\makefakemediumeuro%
\PackageWarningNoLine{eurofont}{%
You have tried to use the \protect\makeusereuro\space command
to\MessageBreak print a euro symbol, but you have not defined
the\MessageBreak \protect\makeusereuro\space command. This has
probably happened in\MessageBreak the \protect\euro\space command. I
shall print a faked euro symbol\MessageBreak for now}}
\DeclareFontFamily{OT1}{chin}{}
\DeclareFontShape{OT1}{chin}{m}{n}{<-> china10}{}
\providecommand{\chinaeeuro}{%
\IfFileExists{china2e.sty}%
{\EF@debugrep{chinaeeuro}%
\SelectOnWeight%
{{\usefont{OT1}{chin}{m}{n}\char255}}% light
{{\usefont{OT1}{chin}{m}{n}\char255}}% medium
{\mbox{\EF@pmb{\usefont{OT1}{chin}{m}{n}\char255}}}% bold
{\mbox{\EF@pmb{\usefont{OT1}{chin}{m}{n}\char255}}}% ultra bold
}%
{\EF@debugrep{chinaeeuro - we have a problem}%
\PackageWarning{eurofont}{%
The \protect\euro\space command
is trying to print a euro symbol\MessageBreak
from the China2e fount, but I can't find the file\MessageBreak
china2e.sty.\MessageBreak\MessageBreak
I'm assuming that you've not got the China2e font\MessageBreak
installed, so I'm printing a faked euro instead\MessageBreak}%
\makefakeeuro}}
\providecommand{\cmrfakeeuro}{%
\EF@debugrep{\protect\cmrfakeeuro}\fakelighteuro}
\providecommand{\cmssfakeeuro}{%
\EF@debugrep{\protect\cmssfakeeuro}\fakemediumeuro}
\providecommand{\cmttfakeeuro}{%
\EF@debugrep{\protect\cmttfakeeuro}\fakemediumeuro}
\providecommand{\makefakemediumeuro}{\EF@debugrep{makefakemediumeuro}%
\@ifundefined{\f@family fakeeuro}{\fakemediumeuro}%
{\csname\f@family fakeeuro\endcsname}}
\providecommand{\makefakelighteuro}{\EF@debugrep{makefakelighteuro}%
\@ifundefined{\f@family fakeeuro}{\fakelighteuro}%
{\csname\f@family fakeeuro\endcsname}}
\providecommand{\makefakeheavyeuro}{\EF@debugrep{makefakeheavyeuro}%
\@ifundefined{\f@family fakeeuro}{\fakeheavyeuro}%
{\csname\f@family fakeeuro\endcsname}}
\providecommand{\makefakeeuro}{\EF@debugrep{makefakeeuro}%
\@ifundefined{\f@family fakeeuro}{%
\EF@checkiflisted{\f@family}{\fakelightlist}\relax
  \ifEF@listed \makefakelighteuro
    \else
    \EF@checkiflisted{\f@family}{\fakemediumlist}\relax
    \ifEF@listed \makefakemediumeuro
      \else
      \EF@checkiflisted{\f@family}{\fakeheavylist}\relax
      \ifEF@listed \makefakeheavyeuro
        \else%                If <fam>'s not listed,
        \makefakemediumeuro%  print medium faked euro
        \fi \fi \fi
}%
{\csname\f@family fakeeuro\endcsname}}
\providecommand{\pzcfakeeuro}{\EF@debugrep{pzcfakeeuro}%
\fakemediumeuro[-0.1ex]}
\providecommand{\maketexteuro}{\EF@debugrep{maketexteuro}%
\EFiftexteuroexists{\texteuro}{\makefakeeuro}}
\providecommand{\cmeuro}{\EF@debugrep{cmeuro}%
\EFiftexteuroexists{\texteuro}{\makefakeeuro}}
\ifEF@eurosym
\EF@debugrep{Using eurosym's euro command}
\providecommand{\makecmeuro}     {\EF@debugrep{makecmeuro;      ESeuro}\ESeuro}
\providecommand{\makedefaulteuro}{\EF@debugrep{makedefaulteuro; ESeuro}\ESeuro}
\providecommand{\makeserifeuro}  {\EF@debugrep{makeserifeuro;   ESeuro}\ESeuro}
\providecommand{\makesanseuro}   {\EF@debugrep{makesanseuro;    ESeuro}\ESeuro}
\providecommand{\makemonoeuro}   {\EF@debugrep{makemonoeuro;    ESeuro}\ESeuro}
\else
\EF@debugrep{Not using eurosym's euro command}
\providecommand{\makecmeuro}     {\EF@debugrep{makecmeuro     }\cmeuro}
\providecommand{\makedefaulteuro}{\EF@debugrep{makedefaulteuro}\makefakeeuro}
\providecommand{\makeserifeuro}  {\EF@debugrep{makeserifeuro  }\serifeuro}
\providecommand{\makesanseuro}   {\EF@debugrep{makesanseuro   }\sanseuro}
\providecommand{\makemonoeuro}   {\EF@debugrep{makemonoeuro   }\monoeuro}
\fi
\providecommand{\makechinaeeuro}
               {\EF@debugrep{makechinaeeuro}\chinaeeuro}
\DeclareRobustCommand{\EFeuro}{\EF@debugrep{start EFeuro:
 \f@encoding/\f@family/\f@series/\f@shape}%
 \EF@checkiflisted{\f@family}{\userlist}\relax
 \ifEF@listed\EF@debugrep{EFeuro makeuser euro}\makeusereuro
  \else
  \@ifundefined{\f@family euro}{\@tempswatrue}%   test for \<fam>euro
  {\EF@debugrep{EFeuro \f@family euro}\relax%           do \<fam>euro
  \@tempswafalse\csname\f@family euro\endcsname}\relax% do \<fam>euro
  \if@tempswa% if \<fam>euro doesn't exist, do the next test
    \EF@checkiflisted{\f@family}{\texteurolist}\relax
    \ifEF@listed \EF@debugrep{EFeuro texteuro}\maketexteuro
      \else
      \EF@checkiflisted{\f@family}{\chinaelist}\relax
      \ifEF@listed \EF@debugrep{EFeuro China2e euro}\makechinaeeuro
        \else
        \EF@checkiflisted{\f@family}{\cmlist}\relax
        \ifEF@listed \EF@debugrep{EFeuro cm euro}\makecmeuro
          \else
          \EF@checkiflisted{\f@family}{\seriflist}\relax
          \ifEF@listed \EF@debugrep{EFeuro serif euro}\makeserifeuro
            \else
            \EF@checkiflisted{\f@family}{\sanslist}\relax
            \ifEF@listed \EF@debugrep{EFeuro sans euro}\makesanseuro
              \else
              \EF@checkiflisted{\f@family}{\monolist}\relax
              \ifEF@listed \EF@debugrep{EFeuro mono euro}\makemonoeuro
                \else
                \EF@checkiflisted{\f@family}{\fakelightlist}\relax
                \ifEF@listed \EF@debugrep{EFeuro fake light euro}\makefakelighteuro
                  \else
                  \EF@checkiflisted{\f@family}{\fakemediumlist}\relax
                  \ifEF@listed \EF@debugrep{EFeuro fake med euro}\makefakemediumeuro
                    \else
                    \EF@checkiflisted{\f@family}{\fakeheavylist}\relax
                    \ifEF@listed \EF@debugrep{EFeuro fake heavy euro}\makefakeheavyeuro
                      \else \EF@debugrep{EFeuro default euro}\makedefaulteuro
                      \fi \fi \fi \fi \fi \fi \fi \fi \fi \fi \fi}
\AtBeginDocument{%
\let\oldeuro\euro% save the previous \euro command (if one exists)
\let\euro\EFeuro}% make the \euro command be \EFeuro come what may
\endinput
%%
%% End of file `eurofont.sty'.